Bounce Flash With Secondary Reflector; Manual Flash Exposure Corrections; Close-Ups / Macro Shots - Metz Mecablitz 58 AF-2 digital Mode D'emploi

10.3 Bounce flash with secondary reflector

The secondary reflector is not supported by the stroboscopic, modelling
light (ML) and remote flash modes. The secondary reflector does not
flash when the main reflector is in its normal position or is tilted down-
wards.

10.4 Close-ups / macro shots

TTL F 5.6
TILT
TILT 35
12 m ISO 200
The minimum lighting distance is approximately 10% of the maximum
flash range indicated on the LC display. For close-up shots, make sure
that the flash light is not shaded by the lens.
If the main reflector is tilted down-
wards, "TILT" is shown on the display
to indicate this.

10.5 Manual flash exposure corrections

Dark subject in front of a bright background:
Bright subject in front of a dark background:
Manual flash exposure correction is possible in TTL flash mode only if the
camera supports this function (consult the camera's operating instruc-
tions). If the camera does not support this function, the adjusted correc-
tion value will have no effect. For some camera models, the manual flash
exposure corrections must be adjusted on the camera. If this is the case,
no correction value will appear on the flash unit display.