Gallagher HobbyMaster POWERFENCE ENERGIZER Instructions D'installation page 5

• Connecting leads shall not be installed in the same conduit as
the mains supply wiring, communicating cables or data cables.
• Connecting leads shall not be installed in the same conduit
as the mains supply of wiring, communicating cables or data
cables.
• A non-electrifi ed fence incorporating barbed wire or razor
wire may be used to support one or more off-set electrifi ed
wires of an electric animal fence. The supporting devices for
the electrifi ed wires shall be constructed so as to ensure that
these wires are positioned at a minimum distance of 150mm
from the vertical plane of the non-electrifi ed wires. The
barbed wire and razor wire shall be earthed at regular inter-
vals.
• Where an electric animal fence crosses a public pathway, a
non-electrifi ed gate shall be incorporated in the electric fence
at that pojnt or a crossing by means of stiles shall be provided.
At any such crossing, the adjacent electrifi ed wires shall carry
warning signs (G602).
How HobbyMaster works
The HobbyMaster Energizer sends electrical pulses along the
fence line, about one second apart. These pulses give the animal
a short, sharp, but safe shock. The shock doesn't harm the
animal. It is suffi ciently memorable that the animal never forgets
the shock, and will avoid the fence.
4
3C2534.indd 4 3C2534.indd 4 2/8/05 2:07:18 PM 2/8/05 2:07:18 PM