Additional Accessories - Gallagher HobbyMaster POWERFENCE ENERGIZER Instructions D'installation

Testing the Fence
• Check the fence periodically using a Digital Volt Meter (G503).
• If you don't have a fence tester, use a blade of grass. To do this
hold the grass between your thumb and forefi nger and touch
the grass to the fence wire. Slowly move closer until a pulse is
felt.
• Always be on the lookout for fallen branches, weeds or shrubs
on the fence. Remove them from the fence because these will
cause the fence to short out and be less effective.
Joining Fences
If you want to join 2 fences or to run the fence under an object,
use double insulated cable (G609 or G627) and Joint Clamps
(G603).
If there is no Pulse on the Fence
1. Check whether the HobbyMaster is working: if the light is not
fl ashing, test the mains power supply. If the power supply is
OK, the HobbyMaster needs to be serviced.
2. Check the cable to the earth stake and the cable to the fence
is not broken.
3. Check the connections at the earth stake and at the fence are
secure.
4. Remove fallen branches, weeds or shrubs from the fence.

Additional Accessories:

Warning sign (G602):
Alerts people to your new HobbyMaster fence.
Neon Fence Tester (G501):
See at a glance if your fence is switched on.
Digital Volt Meter (G503):
See exactly how your HobbyMaster fence is performing.
Need to extend your HobbyMaster fence?:
See your Gallagher dealer, they'll be happy to help.
3C2534.indd 7 3C2534.indd 7
Save these Instructions
7
2/8/05 2:07:18 PM 2/8/05 2:07:18 PM