Loading And Changing Batteries - Metz MECABLITZ 28 C-2 Mode D'emploi

Fig. 2: Exchanging batteries

2.2 Loading and changing batteries

• Switch off the flashgun with the O switch.
• Push the battery compartment cover in the direction of
the arrow.
• Load the dry-cell or NiCad batteries lengthwise in
conformity with the indicated battery symbols.
Ensure correct polarity when loading batte-
ries. Always exchange all 4 batteries. All
batteries should have approximately the
same charge.
24
2. Preparing the flashgun for use
• Reclose the battery compartment cover after the
batteries have been loaded.
Spent batteries must not be thrown into the
dustbin! Contribute to the protection of the
environment and discard spent batteries at
the appropriate disposal points!