Publicité
Les langues disponibles
Les langues disponibles
This manual describes what you should do to ensure this product is fi tted correctly.
We developed this procedure so the installation will be quick and reliable, so please
follow these instructions with care.
•
Please follow the instructions in this manual alone.
•
Nobody involved with the fi tting of this product is authorised to remove
guarantee seals and/or access the interior of the product or its accessories.
•
Nobody involved with the fi tting of this product is authorised to modify and/or
adapt it or any of its accessories.
•
The manufacturer is not liable for any damage or injury if the product or any
accessories are fi tted incorrectly .
•
Incorrect fi tting or inadequate repairs can be a health hazard and render null and
void any form of guarantee that applies to this appliance.
•
Metavoice must only be powered with a 12 volt DC power supply (± 4V) and
negative earth. If it is used with any other voltage or inverted polarity, the
appliance will be damaged.
•
When fi tting the Metavoice and its various parts, take the greatest care not to
cause any damage to devices fi tted on the vehicle that are needed to drive it
(such as the brakes, steering system, etc.) or for vehicle safety (Air bag) as
these are essential to safeguard safe use of the vehicle and for its occupants.
•
When fi tting the product, be sure not to damage the electric wires, cables or any
other safety device fi tted on the vehicle.
•
Make sure the position chosen for the wires in the Metavoice cable will not
cause them excessive wear (for example, running them underneath the seats or
along sharp edges). We recommend taping them down with black tape once the
product has been fi tted.
•
Do not place the module close to sources of heat.
•
Do not fi t the module inside a closed metal housing or anywhere on the vehicle
where radio frequency transmission may be hindered, as this could cause
problems when using the Bluetooth utility.
INFO AND PRECAUTIONS
9
EN
Publicité
