Abicor Binzel VTS 290 Mode D'emploi page 32

6 Putting into operation
6.1 Equipping the torch neck
1 Tip adaptor
2 Torch neck
Fig. 5 Equipping the torch neck
6.2 Mounting the torch neck
1 Torch neck
Fig. 6
Mounting the torch neck
EN - 10
1
6
3 Complete neck liner
4 Contact tip
1 Screw the tip adaptor (1) firmly into the torch neck (2) .
2 Screw the contact tip (4) into the tip adaptor (1) and tighten it using a
multiple wrench.
3 Screw the spatter protector (5) into the torch neck (2) .
4 Screw gas nozzle (6) onto the torch neck (2) .
5 Screw the neck liner (3) into the torch neck (2) on the connection side.
2 2 clamping screws M5x25
1 Insert torch neck (1) into torch mount (2) .
2 Secure torch neck (1) with clamping screws (1).
Ensure correct fit of torch neck (1) and torch mount (2).
2
5
5
6
1
3
3 Torch mount
VTS torch system
3
4
Spatter protector
Gas nozzle
2