Sharpening Wedge - Zipper Maschinen ZI-HS10TN Mode D'emploi

Masquer les pouces Voir aussi pour ZI-HS10TN:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 74
17.3

Sharpening Wedge

This log splitter is equipped with reinforced splitting wedge which blade is specially treated. After
long periods of operation, and when required, sharpen the wedge using a fine toothed file
removing any burrs or flat spots on the edge.
18
DISPOSAL
Observe the national waste disposal regulations. Do not dispose of the machine,
machine components or equipment in residual waste. If necessary, contact your
local authorities for information on the disposal options available. If you buy a
new machine or an equivalent device from your specialist dealer, he is obliged in
certain countries to dispose of your old machine properly.
Altöle sind giftig und dürfen nicht in die Umwelt gelangen. Kontaktieren Sie
gegebenenfalls Ihre lokalen Behörden für Informationen bezüglich der
ordnungsgemäßen Entsorgung.
19
TROUBLESHOOTING
PROBLEM
Motor does not start
Incorrect motor rotation
direction
Log Splitter does not work
while motor running
Log Splitter works with
abnormal vibration and noise
All repairs on this machine must be carried out by a specialist for
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-HS10TN / ZI-HS12TN / ZI-HS14TN
PROBABLE CAUSE
Switch is O
FF
Incorrect connection
Valve is not opened owing to
the connection parts loosening
Control Levers or connection
parts bent
Lower hydraulic oil level
Lower hydraulic oil level
this product!
DISPOSAL
REMEDY SUGGESTED
Set switch to O
N
Reverse polarity (by an
electrician)
Check and tighten the parts
Repair the bent parts
Check and refill hydraulic oil
Check and refill hydraulic oil
33

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Zi-hs12tnZi-hs14tn

Table des Matières