Wireless Switch Adapter 868.3 Mhz; Preparation; Download App / Pc Software Brematicpro; Pairing The Wireless Switching Adapter With The Brematicpro Wireless Remote Control - brennenstuhl SmartHome Mode D'emploi

Wireless switch adapter 868.3 MHz

Preparation

Connect the wireless switching adapter to an easy to access socket.
The mains voltage on site must correspond with the technical
data of the wireless switching adapter (see "Technical data").
Check the power input of the consumer you intend to connect
to the wireless switching adapter prior to use. The maximum
load is max. 3600 W.

Download app / PC software BrematicPRO

The Brennenstuhl Home Automation Systems BrematicPRO is controlled
via the BrematicPRO app / PC software. The app can be downloaded
for free from the App Store and Google Play. The PC software is available
for download at www.brematic.com/en/service.
Note: The app and PC software are self-explanatory and therefore
will not be explained.
Please follow the on-screen instructions for download and installation.
For more information about the app and how to use it, please visit
www.brematic.com/en/service
Pairing the Wireless Switching Adapter with
the BrematicPRO Wireless Remote Control
The wireless switching adapter can be paired directly with the
BrematicPRO wireless remote control.
12 EN
Press and hold the pair button
for 3 seconds.
The LED will flash red.

Unpair

Whilst the LED is flashing,
press a button on the left of
the BrematicPRO wireless
remote control you wish to
program for the device.
Once the devices have been
paired the LED will light up
green. This completes the
pairing process.
Press and hold the pair button
for 3 seconds.
The LED will flash red.
Whilst the LED is flashing,
press the respective button on
the right on the BrematicPRO
wireless remote control you
wish to unpair.
This completes the unpairing
process.