Information About Wireless Operation; Duty Cycle; Scope Of Delivery; Technical Data - brennenstuhl SmartHome Mode D'emploi

Information about wireless operation

This device uses the 868.3 MHz proprietary wireless protocol. Wireless
transmission is implemented using a non-exclusive channel, interference
can therefore not be excluded.
The range in building may differ greatly open areas. In addition to
the transmission power and reception properties of the receivers,
environmental factors, e.g. humidity in addition to structural factors
on site, play an important role.
The range can partly be significantly reduce due to:
• wood, gypsum, concrete, reinforced concrete walls
• proximity to metal and conductive objects
• broadband interference, e.g. in residential areas (DECT phones,
mobiles, wireless headphones, wireless speakers, wireless
weather stations, baby monitors)
• proximity to electric motors, transformers, mains adapters,
computers

Duty cycle

Duty cycle refers to a transmission time limit regulated by law for
devices transmitting in the 868 MHz range. It is intended to ensure
smooth operation of devices operating in the 868 MHz range. The
maximum transmission time of each device is 1 % of an hour
(corresponding to 36 seconds / hour). Once the 1 % limit has been
reached it cannot transmit until the time limit of the duty cycle has
ended, so after one hour.

Scope of delivery

1 x Wireless switch adapter
1 x Quick start guide
1 x Instructions for use (digital, available for download)

Technical data

Product designation: FA 868 01 W3600 3726
Item no.: 1294500
Radio frequency: 868.3 MHz
Max. transmitting power: < 20 mW
Frequency: 868.1 - 868.5 MHz
Duty cycle: < 1 % per h
Supply voltage: 230 V / AC, 50 Hz
Max. switching capacity: 3600 W
Power input: < 1 W
Ambient temperature: 0 °C to 35 °C
Protection type: IP20
Wireless switch adapter 868.3 MHz
Open area range: approx. 100 m
Dimensions (W x H x D): 113.2 x 55 x 70.7 mm
Weight: 111 g
Device corresponds to: protection class I, pollution degree: 2, rated
impulse voltage: 2500 V, operating mode: S1, PTI175, level: 3,
unipolar switch-off
Non-replaceable installation fuse: thermal cutoff
Subject to technical changes without notice.

Device overview

LED status
lights up green when
Flashing red
Rapid flashing red

Function

The wireless switching adapter is part of the Brennenstuhl Home
Automation Systems BrematicPRO, controlled via app or the BrematicPRO
PC software. The wireless switching adapter can be connected and
controlled directly with the BrematicPRO wireless remote control. It can
be directly linked with the Brennenstuhl Home Automation Systems
BrematicPRO via the BrematicPRO Gateway to use other software-based
functions (e.g. timer control, theme control, astro function).
Safety socket
Pair button with LED
power indicator and
ON / OFF button
On
Pairing mode
Wireless switching adapter reset
EN 11