Festool PRECISIO CS 70 EB Notice D'utilisation page 14

Bench-mounted circular saw and circular
trimming saw
CS 70 E, CS 70 EB
1 Symbols .................................................. 14
2 Technical data ......................................... 14
3 Machine features ..................................... 14
4 Intended use ............................................ 14
5 Safety instructions .................................. 14
6 Commissioning ....................................... 16
7 Machine settings ..................................... 16
8 Working with the machine ...................... 19
9 Service and maintenance ........................ 19
10 Accessories ............................................ 20
11 Disposal ................................................... 20
12 Warranty ................................................. 20
13 EU Declaration of Conformity ................. 20
1 Symbols
Warning of general danger
Risk of electric shock
Wear ear protection.
Wear a dust mask!
Read the operating instructions/notes
2 Technical data
Cutting depth at 90°/45° 0 - 70 mm/ 0 - 48 mm
Inclination
Max. cutting length
Saw blade
CS 70 EB, adjustable
CS 70 E
Power consumption
Table dimensions (L x W)
Bench height with foldaway legs
Bench height without
foldaway legs
Weight with foldaway legs
Protection category of motor (CS 70 EB only)
and IP5X switch according to EN 60529.
Degree of protection
14
-2° - 47°
330 mm
225 x 30 x 2.5 mm
Idling speed
2000 - 4200 rpm
4200 rpm
2,200 W
(110 V: 1,500 W)
690 x 500 mm
900 mm
375 mm
34 kg
/ II
The specifi ed illustrations are at the beginning of
this operating manual.
3 Machine features
[1-1] Foldaway legs
[1-2] On/off switch
[1-3] Cable holder
[1-4] Table insert
[1-5] Rotary knob for adjusting the fence
[1-6] Spacer wedge
[1-7] Stop lever
[1-8] Cutting depth adjuster
[1-9] End cap
[1-10] Groove
[1-11] Rotary knob for adjusting the protective
cover
[1-12] Knobs for adjusting the foldaway legs
4 Intended use
The PRECISIO is designed as a transportable
electric power tool for sawing wood, plastics,
panel materials made of wood and similar mate-
rials. Special aluminium cutting blades supplied
by Festool allow you to use these machines to
saw aluminium. Materials containing asbestos
must not be processed.
The user bears the responsibility for damage and
accidents caused by improper use.
5 Safety instructions
WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric shock,
fi re and/or serious injury.
Save all warnings and instructions for future
reference.
- Never allow children to use the machine.
- Before using the machine, make yourself suf-
fi ciently familiar with the application, setting
and operation of the machine.
5.1 Machine-related safety instructions
- Only use tools that meet standard EN 847-1.
- Saw blades made of High Speed Steel (HSS
steel) must not be used.
- The maximum rotational speed specifi ed on
the tool must be observed.
- Only saw blades that meet the specifi cations
outlined in the chapter "Technical data" may