Adax Neo Manuel D'utilisation page 13

NB! After power cuts of over 60 minutes the thermostat reverts to the default setting of 22°C.
3 Start nighttime temperature reduction
At the time you wish temp.
reduction to start, press "7"
until 15ºC is displayed. The
green lamp (B) will now
flash slowly to indicate that
temp. reduction is active.
The temperature is lowered
to 15ºC for the next 7 hours.
This will now be repeated at
the same time every night.
7 Change the temp. reduction setting
x3
Calibration
11
18°C 20°C
Should the actual room temperature and
the Neo's setting not correspond, Neo
should be calibrated. First let the heater
work steadily at the same temperature
setting, preferably for at least 24 hours,
keeping doors and windows closed. This
makes certain that it is Neo that is
controlling room temperature. Sudden, big
changes in outdoor temperature may affect
calibration, making it less precise.
Hold down on "F" and
press 3 times on "7" eller
"5" depending on which
you wish to change. When
"ºC" flashes in the display,
release "F".
Press or to choose
your desired temp. You can
select different daytime and
nighttime settings.
= 2°C deviation
Hold down on "F" until "d" is displayed.
Release "F" for a moment then press it once
more. ºC will be displayed, and then the
setting for normal temp. Press
the display shows the same as the actual
measured room temperature. Store by
pressing "F", or let the new setting be
automatically stored after appr. 30 seconds.
4 Start daytime temperature reduction
At the time of day you wish temp.
reduction to start, hold down but-
ton "5" until 15ºC is displayed.
The green lamp (A) will flash
slowly denoting that temp. reduc-
tion is active. The temperature
is lowered to 15ºC for the next 5
hours. This will now be repeated
at the same time from Monday
to Friday, leaving Saturday and
Sunday unaffected.
8 Alter the duration of temp. reduction
x2
or
Hold down on "F" and
press twice on "7" or "5"
depending on which you
wish to alter. When "h"
(hour) flashes in the
display, release "F".
Press or to choose
the number of hours you
wish temp. reduction to
last.
20°C 20°C
The heater will now
work with the
temperature displayed
until by Neo matching the
actual temperature of
the room.
13