Maintenance And Storage; Ordering Spare Parts - Hurricane HHR 40 Mode D'emploi D'origine

Anleitung_HHR_40_SPK7__ 19.09.13 09:38 Seite 10
GBR

10. Maintenance and storage

b Clean the machine with a brush or rag after each
use.
b Store the equipment in a location that is dry and
not accessible by children. For storage in less
space you can remove the grass basket and
move the push bar into a vertically upright
position (Fig. 10).
b Ensure that all mounting components (i.e. screws,
bolts, nuts etc.) are always tightened so that the
machine can be safely operated at all times.
b Replace excessively worn or damaged parts
immediately.
b In order to ensure that you enjoy your scarifier for
many years to come, all screwed parts, as well as
the wheels and axles, should be cleaned and
lubricated.
b Keeping your hand mower in good condition not
only ensures a long lifespan and high
performance, but also enables the machine to
thoroughly cut your grass with minimal effort.
b The blade on the mower spindle is subject to
more wear and tear than any other component of
the unit. Check the condition of the blade on the
mowing spindle at regular intervals and make
sure that it is tightly fastened.
b If the blades on the mower spindle become blunt
and need replacing, please contact our customer
service. Use only genuine spare parts.
11. Packaging
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled.

12. Ordering spare parts

Please provide the following information on all orders
for spare parts:
b Model/type of the equipment
b Article number of the equipment
b ID number of the equipment
b Spare part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info
10