System Menu - Renkforce RF-DAB-BEDSIDE1 Notice D'emploi

Calling station information
• Briefly push the MENU/INFO button (4) to display various types of information on the station
you just listened to on the display.
• Push the MENU/INFO button (4) once more to move to the next display.
• The contents of the displayed station information depend on the station.
Switching between stereo and mono
• In FM mode, push the button SCAN/ENTER (9) in order to switch the reception type (stereo
or mono).
• Every push of a button switches between the two reception types.
For weak stations, mono reception is recommended, since this produces less noise.
d) System Menu
Menu operation
• Keep the button MENU/INFO (4) pushed to switch to the menu display.
• Push the buttons PREV (7) or NEXT (11) button to navigate the menu.
• Push the button SCAN/ENTER (9) to select or confirm a menu item.
• Push the MENU/INFO (4) button in the menu display briefly to jump one level back in the
menu.
If there no input is made for some time in the menu display, the display will return to
the normal operating display.
Settings
TIME/DATE
SYSTEM VERSION
FACTORY RESET
FM SCAN SETTING
32
Manually setting time and date
Display of the software version
Factory Reset
Attention: all settings will be deleted
Settings of the FM station scan sensitivity (FM only)
STATION STRONG
ONLY > Station scan only stops for strong stations
ALL > Station scan stops for weak stations as well