Transferring Dictation Files To A Pc - Philips LFH 9120 Manuel De L'utilisateur

E Tip: If your Digital Pocket Memo supports fast recharging through the USB cable, you do
not need to use the power supply. The connected PC must support the USB specification
(500mA) and needs to be on during the charging process.
3.3

Transferring dictation files to a PC

Make sure that the software application is running on the PC.
1
Make sure that the docking station is connected to the PC with the USB cable.
2
Switch on the Digital Pocket Memo by moving the On/Off switch to the
3
Insert the Digital Pocket Memo into the docking slot of the docking station and press it down
4
firmly until it locks.
Depending on the device and software settings, the file transfer either starts automatically (to
5
a predefined destination path) or needs to be activated through the software application.
When the files have been successfully transferred, the Digital Pocket Memo will indicate to
6
disconnect, and you can remove the Digital Pocket Memo from the docking station.
Important: Do not remove or switch off the Digital Pocket Memo while the file transfer is
C
in progress, otherwise your dictation files may be damaged.
D Note: See the Digital Pocket Memo User Manual for detailed information on operating the
Digital Pocket Memo.
Disclaimer and Notices
Philips performs extensive testing with the most popular configurations. However, since PC add-
ons and device drivers are updated continually, conflict-free operation cannot be guaranteed.
The CE mark confirms that the device corresponds to the relevant guidelines of the
European Union.
The cardboard used for packaging can be recycled. This electronic device contains
recyclable material.

ON position.
User manual