Advanced Operation - Sony XAV-7W Mode D'emploi

Advanced Operation

FM/AM Reception
Standby mode
When the unit is in standby mode with
only the clock indication shown, pressing
SOURCE shows the selected source on
the monitor or the display window.
Note
When the monitor is open, DSPL on the
card remote commander cannot be used
during radio reception.
Reading the monitor and display
window
Information on the selected source is shown on the monitor
or display window (when monitor is closed).
Monitor indication during radio reception
1
F M 1
4
S T A
S T
5
6
1 Source type and frequency band
2 Preset number (1 - 6)
3 Frequency
4 Station memo (name of station, etc.)
Notes
• Up to 8 characters. (Only upper-case characters are available.)
• "........" appears when no name assigned.
5 Pictograms
Various settings are shown as pictograms.
Example)
ST: Stereo reception
LOUD: "Loudness" is set to "on"
6 Graphics display
Normally, the current settings for DSO (page 32) and EQ7
(page 33) are shown here.
Pressing LIST on the card remote commander brings up a list
of stored stations (page 22).
While setting the equalizer curve, the graphic equalizer is
shown (page 34).
7 Clock indication
When "Dual Information" is set to "on", the time is also
shown (page 39).
2 3
.
6 9 7 7 MH z
No.
T I ON
D S O E Q 7
N e w A g e
1 0 : 3 0
continue to next page t
L OU D
7
15