Technical Specifications; Warranty/Service - Beurer MP 62 Mode D'emploi

11. Technical specifications

Supply
Input:
Output:
Average active efficiency:
No-load power consumption: ≤ 0.09 W
Speed:
Device dimensions:
Weight:
Subject to technical changes

12. Warranty/service

Beurer GmbH, Söflinger Straße 218, 89077 Ulm, Germany (hereinafter referred
to as "Beurer") provides a warranty for this product, subject to the requirements
below and to the extent described as follows.
The warranty conditions below shall not affect the seller's statutory war-
ranty obligations which ensue from the sales agreement with the buyer.
The warranty shall apply without prejudice to any mandatory statutory
provisions on liability.
Beurer guarantees the perfect functionality and completeness of this product.
The worldwide warranty period is 3 years, commencing from the purchase of the
new, unused product from the seller.
The warranty only applies to products purchased by the buyer as a consumer
and used exclusively for personal purposes in the context of domestic use.
German law shall apply.
During the warranty period, should this product prove to be incomplete or de-
fective in functionality in accordance with the following provisions, Beurer shall
carry out a repair or a replacement delivery free of charge, in accordance with
these warranty conditions.
100-240 V~; 50/60 Hz 0.5 A
30.0 V 0.25 A; 7.5 W
≥ 80.3 %
2,000 - 5,400 rpm +/- 20%
158 x 35 x 36.5 mm
Mains part: approx. 93 g
Device: approx. 111 g
23