Cleaning And Maintenance; Accessories And Replacement Parts - Beurer MP 62 Mode D'emploi

When filing, always work from the outside of the nail towards the tip!
Always check results regularly during treatment. As soon as the application
becomes unpleasant, stop the treatment.

8. Cleaning and maintenance

Before cleaning the power unit, always unplug it from the socket outlet!
– Clean the instrument with a slightly moistened cloth. You can also moisten the
cloth with mild soap suds to remove more stubborn dirt.
– If necessary, for reasons of hygiene, the attachments can be cleaned with a
cloth or brush moistened with alcohol. Dry them carefully afterwards.
– Do not drop the instrument.
– Make sure that no water enters the instrument. But if this should happen, do
not use the instrument again until it is completely dry.
– Do not use chemical detergent or scouring agents for cleaning.
– Never immerse the instrument or plug-in power unit in water or other liquids.

9. Accessories and replacement parts

Replacement parts and wearing parts are available from the corresponding
service address (according to the service address list). Please state the corre-
sponding order number.
Description
1 x Sapphire Cone
1 x Coarse Sapphire Cone
1 x Fine-Grain Sapphire Wheel
1 x Coarse-Grain Sapphire Wheel
1 x Cylindrical Cutter
1 x Flame-Shape cutter
1 x Round Sapphire Cutter
1 x Nail Cutter
1 x Felt Cone
30 x Single-Use Sandpaper Attachments
1 x Protective Nail Dust Cap
Sandpaper Attachment
10. Disposal
Please dispose of the device in accordance with EC Directive – WEEE
(Waste Electrical and Electronic Equipment).
If you have any queries, please contact the appropriate local authorities.
Article or order number
572.14
163.526
22