Olympus Camedia C-3030ZOOM Mode D'emploi page 6

Inserting SmartMedia
Note:
• Use 3V (3.3V) cards only. 5V cards cannot
be used.
• Olympus brand cards are recommended
(already formatted). Non-Olympus brand
cards must be formatted by the camera.
• When using a special function SmartMedia
card (optional), insert it in the same way.
Caution:
• NEVER open the card cover, eject the card, remove the batteries, or pull the
plug while the camera is in operation. It may destroy the data in the card.
• The card is a precision instrument. Handle it carefully and do not subject it
to physical shocks.
• Do not touch the contact area of the card.
Power on/off
Remove the lens cap, then set the Mode dial to P, A/S/M,
are no pictures stored in the card when the Mode dial is set to
PICTURE will appear on the LCD monitor.
Checking the card
When the power is turned on in the Record mode, the camera checks the
SmartMedia card.
Control panel
Card error
CARD
SETUP
6
When there is no SmartMedia card in
Viewfinder
the camera / the card is protected:
The Card error indicator on the control
panel and the Green lamp blink.
Green lamp
When the card needs to be formatted:
The Card error indicator on the control
panel lights, and the Card format
confirmation screen appears. Select
NO [ OFF ]
to enter the Card format mode.
LCD monitor
Insert
.
SmartMedia
or . If there
, NO