Olympus Camedia C-3030ZOOM Mode D'emploi page 20

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SQ1/SQ2 setup
Press the Menu button, then press the top/bottom arrows on the Jog dial to
select MODE SETUP and press the right arrow to select SETUP. Press the
OK button. Press the top/bottom arrows to select SQ1 or SQ2, then press the
right arrow to select SETUP and press the OK button. Press the top/bottom
arrows to select the resolution and press the right arrow, then press the
top/bottom arrows to select the picture quality. Press the left arrow to confirm
the setting. Press the OK button repeatedly until the Menu disappears.
Full-time AF
Press the Menu button, then press the top/bottom arrows on the Jog dial to
select MODE SETUP and press the right arrow. Press the OK button. Press
the top/bottom arrows to select FULL–TIME AF, press the right arrow and
top/bottom arrows to ON or OFF. Press the left arrow to confirm the setting.
Press the OK button twice to close the Menu. ON keeps the image on the
LCD monitor in focus at all times without having to press the Shutter release
button.
Rec view
Press the Menu button, then press the top/bottom arrows on the Jog dial to
select MODE SETUP and press the right arrow to select SETUP. Press the
OK button. Press the top/bottom arrows to select REC VIEW, press the right
arrow and top/bottom arrows to make the selection. Press the left arrow to
confirm the setting. Press the OK button twice. When set to CHECK, it is
possible to check the image and decide whether or not to save it. CHECK is
not possible in the TIFF mode.
Index-display adjustment
Press the Menu button, then press the top/bottom arrows on the Jog dial to
select MODE SETUP and press the right arrow to select SETUP. Press the
OK button. Press the top/bottom arrows to select
and top/bottom arrows to select the number. Press the left arrow to confirm
the setting. Press the OK button twice.
Sharpness
Press the Menu button, then press the top/bottom arrows on the Jog dial to
select MODE SETUP and press the right arrow to select SETUP. Press the
OK button. Press the top/bottom arrows to select
and top/bottom arrows to make the selection. Press the left arrow to confirm
the setting. Press the OK button twice.
20
, press the right arrow
, press the right arrow

Publicité

Table des Matières
loading

Table des Matières