Outdoor Temperature - Velleman WS1080 Mode D'emploi

Outdoor Temperature

1. Touch the outdoor temperature section once and press + or –
to switch between outdoor temperature, wind chill, and dew
point display.
2. Touch the outdoor temperature section a second time and press
+ or – to switch between the temperature display in °C or °F.
3. Touch the outdoor temperature section a third time and press +
or – to set the high temperature alarm (HI AL), or press
ON/OFF to switch the alarm on or off.
4. Touch the outdoor temperature section a fourth time and press
+ or – to set the low temperature alarm (LO AL), or press
ON/OFF to switch the alarm on or off.
5. Touch the outdoor temperature section a fifth time to display
the maximum temperature reading. Hold the value pressed to
reset the value.
6. Touch the outdoor temperature section a sixth time to display
the minimum temperature reading. Hold the value pressed to
reset the value.
Indoor/Outdoor Humidity
1. Touch the indoor/outdoor humidity section once and press + or
– to set the high humidity alarm (HI AL), or press ON/OFF to
switch the alarm on or off.
2. Touch the indoor/outdoor humidity section a second time and
press + or – to set the low humidity alarm (LO AL), or press
ON/OFF to switch the alarm on or off.
3. Touch the indoor/outdoor humidity section a third time to
display the maximum indoor/outdoor humidity reading. Hold
the value pressed to reset the value.
4. Touch the indoor/outdoor humidity section a fourth time to
display the minimum indoor/outdoor humidity reading. Hold the
value pressed to reset the value.
Wind Speed
1. Touch the wind speed section once and press + or – to switch
between average wind speed and gust speed (GUST).
2. Touch the wind speed section a second time and press + or – to
switch between the wind speed display in km/h, mph, m/s,
knots, or Bft.
3. Touch the wind speed section a third time and press + or – to
set the high wind speed alarm (HI AL), or press ON/OFF to
switch the alarm on or off.
4. Touch the wind speed section a fourth time and press + or – to
set the wind direction alarm, or press ON/OFF to switch the
alarm on or off.
5. Touch the wind speed section a fifth time to display the
maximum wind speed reading. Hold the value pressed to reset
the value.
V. 15 – 08/11/2016
WS1080
5 ©Velleman nv