Use And Control Before Use / Starting The Appliance / Temperature Control / Internal Parts - Brandt SA2362E Guide D'installation Et D'utilisation

Use and Control
Before Use
Wait two hours before connecting the
appliance to allow the oil to flow back in the
compressor.
• Before using the appliance for the first time, wash
the interior and all internal accessories with
lukewarm water and some neutral soap so as to
remove the typical smell of a brand-new product,
then dry thoroughly.
Do not use detergents or abrasive
powders, as these will damage the finish.
• Remove safety elements used for transportation.
Starting the appliance
• Insert the plug into the wall socket and turn the
thermostat knob clockwise beyond position «O»
(OFF).
• Turn the thermostat control to the required setting.
D338
The glass shelf above the vegetable drawers
and the bottle shelf should always remain in
position, to ensure correct air circulation.
16
Temperature Control
• The thermostat control situated inside the fridge
compartment regulates the temperature of the
appliance.
• It allows you to adjust the temperature inside the
refrigerator according to use and external
conditions.
• Setting „1" = hightest temperature, warmest
setting
• Setting „6" = lowest temperature, coldest
setting.
• Setting „0" = Off
A medium setting is generally the most suitable.
Internal Parts
Storage shelves
• The shelves can be removed for cleaning.
• To permit storage of food packages of various
sizes, the shelves can be placed at different
heights.
• To remove the internal shelf pull forward until it can
be tipped up or down and removed.
• Please do the same in reverse to insert the shelf at
a different height.
Variable door interior
• To permit storage of food packages of various
sizes, the central door shelf can be adjusted in
height.
• Gradually pull the shelf in the direction of the
arrows until it comes free, then reposition as
required.