Starting And Adjusting The Appliance; Setting The Temperature - Brandt KRYSTO Guide D'installation Et D'utilisation

Starting and adjusting the appliance

EN
1 3
2 4
5
6
Operation of the electronic system
The control panel on the front of your appliance at the top comprises:
- 1) Green led : temperature indication OK
- 2) LCD screen display : temperature indication
- 3) Knob: on/off and temperature adjustment
- 4) Button supercool : quick chill
- 5) Button holidays vacances
- 6) Red led: door open warning
Every time you confirm or deactivate a function a beep sounds.

Setting the temperature

When you put your appliance into operation, set the refrigerator temperature to a moderate setting of 5°C.
4 hours after starting your appliance or after any change to the temperature set in the refrigerator
section, check the temperature "OK" indicator on the screen (see the symbols table).
- If the indicator does not appear, lower the temperature a little and check the "OK" indicator again
after 4 hours. Repeat the operation as many times as required.
- If the "OK" indicator appears on your screen, your refrigerator's temperature is set correctly.
35