Safety Notes - Eaton xChargeIn Manuel D'utilisation

xChargeIn
2

Safety notes

WARNING!
Risk of electric shock and fire hazard!
● Installation, commissioning, maintenance or retrofitting of the charging
● The charging station does not have its own power switch. The line circuit
● The charging station may only be operated in a perfect condition.
● A damaged charging station must be taken out of commission and re-
● A repair of the charging station is not permitted and may only be carried
● No unauthorized conversions and modifications may be made to the
● No markings (such as safety signs, warnings, wire markings...) may be
● Never use faulty, worn-out or dirty charging connectors.
● The use of cable extension sets is prohibited.
● The use of adapters of any kind is prohibited.
● The charging station must be checked regularly for damage to the hous-
● Observe the information and instructions for your vehicle carefully before
1)
Persons who, due to their special training, expertise and experience as
well as knowledge of current standards, are able to assess the work per-
formed and the possible hazards.
Operating instructions V1.04
© EATON
station must be performed by correctly trained, qualified and authorized
1)
electricians who are fully responsible for the compliance with existing
standards and installation regulations. For details, see the "installation
manual".
breaker of the supply line serves as a mains disconnector.
paired or replaced by a qualified and authorized electrician.
out by the manufacturer.
charging station.
removed from the charging station.
ing as well as for defects, wear and soiling of the charging socket or the
charging connector including the charging cable.
you charge the vehicle using the charging station.
Safety notes
105