Safety Notes - Renkforce DL-LED107S-UV Mode D'emploi

6. Safety notes

The guarantee/warranty will expire if damage is incurred resulting from non-compliance with these
operating instructions. We do not assume liability for any consequential damage.
We do not assume any liability for property damage and personal injury caused by improper use
or non-compliance with the safety instructions. In such cases the warranty/guarantee is voided.
• Dear Customer: the following safety information is intended not only for the protection of the device but
also for the protection of your health. Please read the following items carefully:
• For safety reasons, any unauthorized conversions and/or modifications to the product are not permitted.
• This device is a protection class 1 product. The only permissible voltage source is a proper grounded
mains socket (100-240 V/AC, 50-60 Hz) of the public mains.
• Anyone operating, installing, setting up, commissioning or servicing this effect light must be trained and
qualified properly and observe these operating instructions.
• LED radiation may be dangerous if the LED beam or a reflection enters the unprotected eye. Therefore,
familiarise yourself with the statutory regulations and measures of precaution for the operation of this kind
of LED device before using the device.
• Never look straight into the light source during operation. The bright light flashes may temporarily impair
your eyesight. Apart from this, epileptic fits may be triggered under certain circumstances in persons
sensitive to such lights. This particularly applies to epileptics.
• Never touch the mains plug with wet or damp hands. There is a risk of potentially fatal electric shock!
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket (e.g. via
the respective FI switch and circuit breaker) and then carefully pull the mains plug from the mains socket.
Never use the product if the mains cable is damaged.
• When installing the device, make sure that the mains cable is not squeezed or damaged by sharp edges.
• Make sure that no cables lie around openly. Install cables professionally to prevent accidents.
• This product is not a toy and not suitable for children. Children cannot judge the dangers involved when
handling electrical devices.
• Never place containers containing liquids, e.g. glasses, buckets, vases or plants on the device or in its
vicinity. Liquids may get into the housing and impair electrical safety. Ensure that no foreign bodies enter
the inside of the device. Foreign bodies, in particular metal ones, impair the electrical safety of the device.
This also poses great danger of fire or potentially fatal electric shock! If this is the case, first power down
the respective mains socket (e.g. switch off FI switch and circuit breaker) and then pull the mains cable
from the socket. Do not operate the product anymore afterwards, but take it to a specialist workshop.
• Do not expose the device to any high temperatures, dripping or splashing water, strong vibrations or
heavy mechanical stress.
• Do not place any open sources of fire, such as burning candles, on or directly next to the device.
20