PRESIDENT BILL FCC Manuel D'utilisation page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

be done with precision as, if set to maximum (fully clock-
wise), only the strongest signals will be received.
3) CHANNEL SELECTOR ~ SCAN
CHANNEL SELECTOR: s/t keys on the unit and
UP/DN keys on the microphone
The LCD display rotates on a horizontal axis. Press the
upper display s or the UP (3) key on the microphone to
increase
a channel. Press the lower display t or the DN
(3) key to
decrease
a channel.
A beep sounds each time the channel changes if the
KEY BEEP function is activated. See KEY BEEP function
page 12.
SCAN
(long press)
To activate the SCAN function, press until a beep sounds
(see KEY BEEP function page 12) or "SCAN" appears
on the display. Press the s key (3) on the LCD display or
the UP key (3) on the microphone to
order. Press the t (3) key on the LCD display or the DN
key (3) on the microphone to
The scanning stops as soon as there is a busy channel. The
scanning automatically starts 3 seconds after the end of
the transmission and no key is activated during 3 s. The
scan also restarts in increasing order with the s/UP (3)
keys, or in decreasing order with the t/ DN (3) keys.
When the SCAN function is activated, "SCAN" blinks on
the display.
CB channel scan
CB
mode (see § CB/WEATHER CHANNEL page 10),
In
the SCAN function scan the 40
(short press)
scan
in increasing
scan
in decreasing order.
CB
channels.
Press the PTT switch (11) to
function. "SCAN" disappears on the display.
Weather channel scan
WX
In
mode (see § CB/WEATHER CHANNEL page 10),
the SCAN function scan the 7
Press the EMG key (8) for 1 second to
SCAN function. "SCAN" disappears on the display.
Note: The weather channel SCAN can run in the back-
ground while using the CB.
4) DISPLAY
shows
It
all functions:
Indicates transmission
AM mode selected
KEY BEEP function activated
Automatic Squelch Control activated
ROGER BEEP function activated
Weather channel mode is activated
Indicates the reception level and the output power
level
Emergency channel 1 (customizable) is activated
Emergency channel 2 (customizable) is activated
KEY LOCK function is activated
9
CB
deactivate
SCAN
the
WX
channels.
WX
deactivate
the

Publicité

Table des Matières
loading

Table des Matières