Panasonic TY-FB9HD Mode D'emploi page 3

Slot Nos. of the display unit that are compatible with terminal board attachments
2 slots model
3 slots model
Connection
Back view of the Display
• Equipment with SD-SDI or HD-SDI input
capability (Examples) professional-use or
broadcast digital VCRs, professional-use
monitors (CRT, LCD, PDP)
Applicable input signals
Video signal
Signal format
1 1125 (1080) / 60i : 59.94i 60
2 1125 (1080) / 50i
3 750 (720) / 60p : 59.94p
4 750 (720) /50p
5 1125 (1080) / 24sF : 23.985sF
6 1125 (1080) / 30p
7 1125 (1080) / 25p
8 1125 (1080) / 24p
9 525 (480) / 59.94i
10 625 (575) / 50i
Notes:
(1) Additional equipment and cables shown are not supplied with this set.
(2) Currently there is no support for embedded audio.
Slot1 , Slot2
Slot1 , Slot2 (Slot3 is not compatible)
SLOT1
MONITOR
SD-SDI or
HD-SDI
IN
fV Scanning fH
(Hz) format
(kHz)
2:1 Interlace 33.75
50 2:1 Interlace 28.125
60 Progressive 45
50 Progressive 37.5
48 Progressive (sF) 27
30 Progressive 33.75
25 Progressive 28.125
24 Progressive 27
59.94 2:1 Interlace 15.734
50 2:1 Interlace 15.625
SLOT2
• Recommended cable
SD-SDI: 75 Ω coaxial cable 5C-2V
HD-SDI: 75 Ω coaxial cable 5C-FB
• Maximum extension length
SD-SDI: 200 m
HD-SDI: 100 m
when using the above recommended cable
OUT
• Equipment with SD-SDI or HD-
SDI output capability (Examples)
Business digital
professional-use or broadcast digital
VCR
VCRs, professional-use monitors
(CRT, LCD, PDP)
• This HD-SDI board can also receive
SD-SDI signals, and can perform on-
board discrimination automatically.
Dot clock Number of
active pixels
(MHz)
74.25 1920
74.25 1920
74.25 1280
74.25 1280
74.25 1920
74.25 1920
74.25 1920
74.25 1920
27 1440
27 1440
PC IN
SLOT3
SLOT3
Total number Number of Total number
of pixels active lines of lines
2200 1080
2640 1080
1650 720
1980 720
2750 1080
2200 1080
2640 1080
2750 1080
1716 486
1728 576
1125
1125
750
750
1125
1125
1125
1125
525
625
7