Button Functions - SEFRAM 99 Manuel D'utilisation

Button Functions

1) Function rotary switch
(
The rotary switch selects the function.
(2) LCD
3999-count LCD with LOW BATTERY indication.
(3) Select Button
For AC/DC function selection.
In the resistance + continuity + diode function, press
the Select button to select resistance, continuity or diode
function.
(4) Range Button
Press the Range button to select the manual range
mode. In manual range mode, each time press Range
button (less than one second), the range increments
and new value is displayed. To exit the manual range
mode and return to auto mode, press the RANGE button
(More than one second).
(5) HOLD Button
Press the HOLD button (HOLD annunciator turns on)
makes the meter stop updating the LCD display. This
mode can be nested in most of the special modes.
Enabling HOLD function in automatic mode makes the
meter switch to manual mode, but the full scale range
remains the same. Hold function can be cancelled by
changing the measurement mode, pressing range, or
push HOLD again.
(6) COM Terminal
This is the ground input terminal. Use the BLACK test
lead to connect.
(7) "+" Terminal
This is positive input terminal for voltage / ohm
measurement. Use the RED test lead to connect.
- -
9