SEFRAM 99 Manuel D'utilisation page 18

Introduction
● The Lan cable tester is a newly designed tool that can
easily test the correct pin configuration of the RJ45/RJ11
modular cables, 10/100 base-T cable and Token Ring
cable etc.
● By comparing one transmitting end and the
corresponding receiving end, the Lan cable tester also
can test installed cable far away by using the remote
receiving unit.
● The LCT provides the variety for wiring check, such as
cable continuity, open status, short status and miss-wired.
Features
● Designed for RJ45/RJ11 modular cables, 10/100 base-T
cable and Token Ring cable etc.
● The Lan cable tester can verify cable continuity, open,
short circuit and miss-wired.
● The remote receiving unit is available for installed cables
far away either on the wall plates or on the patch panels.
● Auto and manual scan function.
● Ground wire test.
● Display : LED indication for wire status.
● EN 61326-1
LAN CABLE TESTER
- -
1