Turning On The Radio; Setting The Uic Channel Mode (Usa/Can/Int); How It Works - Uniden UM425 Guide D'utilisation

Getting Started

Turning on the radio

Turn the
VOLUME-PWR
the radio displays the user MMSI number; if there is no MMSI set, the radio
displays MMSI not entered.
When it powers on, the radio selects the last channel used.

Setting the UIC channel mode (USA/CAN/INT)

The radio comes preset to use the UIC channels assigned for the United
States. If you are operating in an area that uses Canadian or international
UIC channels, you will need to change the channel mode.
1. Press the
sub-menu.
2. Select USA/CAN/INT. The screen displays the UIC channel setup.
3. Highlight the channel mode you want to use: US (USA mode),
Canadian (Canada mode), or international (Intl mode).
4. Press the
mode and exits the menu.

How It Works

The UM425 has three basic modes of operation:
Operation mode
Normal mode
Scan mode
Weather mode
knob clockwise to turn on the radio. As it powers on,
button to display the menu, and choose the Setup
MENU-PA
SELECT-1W/25W
What it does:
Monitors a single
marine radio
channel and lets
you talk on that
channel.
Monitors all the
channels you save
into memory.
Monitors the
selected NOAA
weather channel.
button. The radio activates the new channel
Use it when:
You want to talk to
another station on a
specific channel.
You have a small
group of channels
you use most often
and want to check
them for traffic.
You want to hear
the current and
forecasted weather
in your area.
E-10
To turn it on/off:
(default mode)
Press the
SCAN-
button.
MEM
Press the
WX-
button.
ALERT