Changing Display And Sound Options; Contrast; Lamp Adjust; Turning The Key Beep On And Off - Uniden UM425 Guide D'utilisation

Using Your Radio
8. To delete the FIPS code, select Delete. To edit the code, select Edit,
then use the
of the six digits.
When you are satisfied with the list of FIPS codes, select Exit to close
9.
the menu screen.

Changing display and sound options

Contrast

The UM425 display has 10 levels of contrast. To adjust the contrast, press
the
MENU-PA
the
CHANNEL UP
desired level.
To restore the default contrast setting, turn the radio off. Press the
button and hold it in while you turn the radio on.

Lamp adjust

The UM425 has 10 brightness levels on the display. To adjust the brightness,
press the
Lamp Adjust. Use the
brightness to your desired level.

Turning the key beep on and off

Key beep is the tone that sounds when you press a key or a button. To turn
off the key beep, press the
then Key Beep. Choose Off to turn off the key beep.

Setting the GPS position manually

If the radio is not receiving valid GPS data, the radio displays Input Position.
Follow the steps below to manually input your position.
NOTE: Be certain any manually-entered position is correct. If you enter the
wrong position and then make a DSC distress call, you will be telling the
Coast Guard to look in the wrong place.
MENU
CHANNEL UP
while the radio is idle. Select System and then Contrast. Use
and
CHANNEL DOWN
MENU-PA
button while the radio is idle. Select System and then
CHANNEL UP
Setup
GPS Setup
SELECT
SELECT
and
CHANNEL DOWN
buttons to change the contrast to your
and
CHANNEL DOWN
MENU-PA
while the radio is idle. Select System and
Position Set
SELECT
E-23
buttons to change each
buttons to change the
--/-- 11:22U
o
--- --.- KT
o
35 40.610 N
o
139 46. 564 E
Use the up and down
arrows to adjust each of
the values in turn.
MENU-PA
16