Installation Of The Microphone Unit; Appendix - Kenwood KDC-X895 Guide De Démarrage Rapide

KDC-X895, KDC-BT848U only
Installation of the
Microphone Unit

Check the installation position of the
microphone (accessory 5).

Remove oil and other dirt from the
installation surface.

Install the microphone.

Wire the cable up to the unit with it
secured at several positions using tape
or the like.
⁄
• Install the microphone as far as possible
from the cell-phone.
Accessory
Fix a cable with a commercial item of tape.
5
Peel the release coated
paper of double-face
adhesive tape to fix on the
place shown above.
Adjust the direction of the
microphone to the driver.

Appendix

About Audio file
• Playable Audio file
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)
• Playable disc media
CD-R/RW/ROM
• Playable disc file format
ISO 9660 Level 1/2, Joliet, Romeo, Long
file name.
• Playable USB device
USB mass storage class
• Playable USB device file system
FAT16, FAT32
An online manual about
audio files is put on the site,
www.kenwood.com/cs/ce/audiofile/.
iPod/iPhone that can be connected
to this unit
Made for
• iPod touch (4th generation)
• iPod touch (3rd generation)
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPod classic
• iPod with video
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod nano (1st generation)
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
For information on the compatibility of
iPod/iPhone software, visit www.kenwood.
com/cs/ce/ipod/.
English | 15