Accessories; Installation The Microphone Unit - Kenwood KCA-HF521 Mode D'emploi

Installation

Accessories

A
The use of any accessories except for those provided might result in damage to the
unit. Make sure only to use the accessories shipped with the unit, as shown above.
Installation the Control Unit
■ Securing to audio board
Accessory C
2CAUTION
Please do not install the unit near the dashboard, the rear tray, or other important components.
Doing so could lead to injury or accident should the unit come off due to a shock and strike a
person or an important component. Tapping screws should be used for mounting. (Attachment
with velcro strips, although easy, can come off with a shock.)
Installation the Microphone Unit <Accessory A>
Fix a cable with a commercial
item of clamper
14
B
Peel the release coated paper of double-face adhesive
tape to fix on the place shown in the left-hand
example.
Adjust the direction of the microphone to the driver.
D
C
■ Securing to pile carpet
Accessory D