To Start The Product; To Stop The Product - RedMax BHB250P Manuel D'utilisation

4. Make sure that the latches snap in place correctly.

To start the product

1. Press and hold the start button until the green LED
light comes on.
2. Use the power trigger to control the speed.

To stop the product

1. Release the power trigger.
2. Press and hold the stop button until the green LED
light comes off.
3. Remove the battery from the product. Press the two
release buttons and pull out the battery.
10
To set the optimal airflow for your
work
1. Press the power trigger to choose the optimal airflow
for your work.
2. Press the cruise control button to set the chosen
airflow, the LED comes on.
3. Continue to work without needing to press the power
trigger.
4. Press the cruise control button again to deactivate
the cruise control function.
To temporarily increase the air flow
1. Start the product. See
10 .
To start the product on page
471 - 004 - 04.09.2018