Velleman PIR1200C Mode D'emploi

PIR1200C -- PIR MOTION DETECTOR FOR CEILING MOUNTING
1. Introduction
The PIR1200C is a very sensitive and energy-saving motion detector. It is equipped with an IC and uses SMT
technology. It can distinguish between night and day (10Lux threshold). Installation of the device is very easy and it is
suited for a wide range of applications.
2. Specifications
Power Source
Ambient Light
Operation Duration
Detection Angle
Detection Distance
Working Temperature
Working Humidity
Installation Height
Power Consumption
Rated Load
Motion Speed Detection Range
3. Operation
• Fig. 1 #1: indicator lamp: is green when the device is switched on,
turns red when there is detection.
• Fig. 1 #2: 4-position selection switch:
- position 1: works always with activation time of ±5s.
- 2: works only at <10Lux with activation time of ±30s
- 3: works only at <10Lux with activation time of 2min ±30s
- 4: works only at <10Lux with activation time of 6min ±1min
4. Installation (see fig. 3 & 4 on p. 2)
• Make sure there's no voltage on the power supply cables.
• Turn the bottom plate counterclockwise and take it off the rest of the detector.
• Mount the bottom plate on the desired location by means of the included screws.
• Connect the wires according to the wiring diagram in fig. 3 below.
• Put the sensor on the bottom plate and turn it clockwise.
• Connect the device to the mains.
5. Wiring Diagram
1. brown
2. blue
3. red
4. input
5. output
6. lamp
7. sensor
PIR1200C
220-240Vac / 50-60Hz
< 10lux
min. 5sec. / max. 6min. ± 1min.
120° (side view) / 360° (top view)
6m max. (24°C)
-20°C to +40°C
< 93% RH
2m to 4m
0.5W (standby 0.1W)
1200W (220-240Vac)
0.6 ~ 1.5m/s
Fig. 3
- 1 -
Fig. 1
Fig. 2
VELLEMAN