Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
PIR1200W & PIR1200B - - PIR Motion Detector
1. Introduction
The PIR1200W & PIR1200B are very sensitive and energy-saving motion detectors. They are equipped with an IC
and use SMT technology. The detector's position can be adjusted up/down and left/right. Motion detectors are
triggered when movement is detected and the PIR1200W & PIR1200B can distinguish between night and day.
Installation of the device is very easy and it is suited for a wide range of applications.
2. Specifications
Power Source
Power Frequency
Ambient Light
Activation Duration
Detection Angle
Detection Range
Working Temperature
Working Humidity
Installation Height
Power Consumption
Motion Speed Detection Range
3. Operation
• You can adjust the detection area according to your needs : turn the device to the left or right and aim it up or
down. Note that the detector is much more sensitive to objects moving across the detection area (fig. 1 below)
than it is to objects coming straight at it (fig. 2 below). This is a very important consideration when selecting the
mounting location.
Fig. 1
• The device can distinguish between day and night thanks to the adjustable ambient light setting. The device can
work in the daytime when the "sun" (max.) position is selected with the selector at the back of the device. The
device will only work with an ambient light level < 3lux when the "moon" (min.) position is selected.
• TIME adjustment : enables the user to set the activation duration (min. 8sec. ±3sec., max. 7min. ± 2min.)
4. Installation (see fig. 3, 4 & 5 on p. 2)
• Deactivate and remove the fuse.
• Remove the screw at the bottom. Remove the two recesses and insert the wires through the holes.
• The bottom part of the housing is mounted with the included screw.
• Connect the wires according to the figures on p. 2.
• Attach the sensor to the bottom part of the housing. Screw the housing shut and connect the device with the
mains.
PIR1200W & PIR1200B
220-240Vac
50-60Hz
< 3lux-2000lux (adjustable)
min. 8sec. ±3sec. / max. 7min. ± 2min.
180°
12m max. (< 24°C)
-20°C to +40°C
< 93% RH
0.5m to 3.5m
0.45W (standby 0.1W)
0.6 ~ 1.5m/s
1
Fig. 2
VELLEMAN
Publicité
Manuels Connexes pour Velleman PIR1200W
Sommaire des Matières pour Velleman PIR1200W
- Page 1 PIR1200W & PIR1200B - - PIR Motion Detector 1. Introduction The PIR1200W & PIR1200B are very sensitive and energy-saving motion detectors. They are equipped with an IC and use SMT technology. The detector’s position can be adjusted up/down and left/right. Motion detectors are triggered when movement is detected and the PIR1200W &...
- Page 2 Please check if the signal source is located within the boundaries of the detection range. Check the installation height. Check if the moving orientation is right. The lamp doesn’t extinguish. Movement is continually detected. The activation duration is too long. PIR1200W & PIR1200B VELLEMAN...
-
Page 3: Specificaties
PIR1200W & PIR1200B - - PIR bewegingsdetector 1. Inleiding De PIR1200W & PIR1200B zijn zeer gevoelige bewegingsdetectors met een zeer beperkt verbruik. Ze zijn uitgerust met een IC en gebruiken SMT technologie. De detector kan worden gedraaid naar links, naar rechts, naar boven en naar beneden. - Page 4 Ils sont pourvus d’un CI et ils emploient la technologie SMT. Vous pouvez tourner le détecteur à gauche et à droite et de haut en bas. Le PIR1200W & le PIR1200B sont activés par la détection de mouvements et ils sont capables de distinguer entre jour et nuit.
-
Page 5: Spécifications
• L’appareil réagit 5 à 10 secondes après la détection d’un mouvement. Ensuite, la lampe sera allumée pendant 5 à 15 secondes. 7. Remarques • Un technicien qualifié doit installer l’appareil. PIR1200W & PIR1200B VELLEMAN... -
Page 6: Problèmes Et Solutions
CI y usan la tecnología SMT. Es posible girar el detector hacia la izquierda/derecha y hacia arriba/abajo. El PIR1200W & el PIR1200B se activan por la detección de movimientos y son capaces de distinguir el día de la noche. Fácil instalación y apto para varias aplicaciones. - Page 7 • Evite bloquear la pantalla de detección y quite todos los objetos móviles de la zona de detección. • No instale este aparato cerca de radiadores, acondicionadores, etc. • No intente realizar usted mismo ningún tipo de servicio y no intente abrir la caja. El servicio debe ser realizado por personal especializado. PIR1200W & PIR1200B VELLEMAN...
- Page 8 Beide haben ein IC und verwenden die SMT-Technologie. Der Bewegungsmelder kann nach links/rechts, nach oben/ unten gedreht werden. Bewegungsmelder werden aktiviert wenn sie eine Bewegung wahrnehmen. Der PIR1200W & PIR1200B können den Unterscheid zwischen Tag und Nacht machen. Das Gerät ist einfach zu installieren und eignet sich für viele Anwendungen.
- Page 9 De Lampe erlischt nicht. Es werden ständig Bewegungen erfasst. Die Aktivierungsdauer ist zu lange. Große Temperaturschwankungen, die durch Klimaanlagen, Kühlkörpern, usw. in unmittelbarer Nähe des Sensors verursacht werden. Änderungen in Technik und Ausstattung ohne vorherige Ankündigung vorbehalten. PIR1200W & PIR1200B VELLEMAN...