Set The Timer; Set The Humidity Level - Philips AC4086 Mode D'emploi

To change to another fan speed, press the
SPEED button.

Set the timer

With the timer function, you can let the
appliance operate for a set number of hours.
When the set time has elapsed, the appliance
automatically switches off.
You can use the timer function in the following
situations:
Situations You will see
One of the SPEED lights (
Choose a fan
or BOOST POWER) and
speed manually
(see 'Manual'). one of the TIMER lights ( , ,
or ) are on.
The appliance The AUTO light is on.
One of the SPEED lights
is in auto mode
(see 'Auto'). (SILENT,
POWER), and one of the
TIMER lights ( , , or ) are
on.
The appliance is The SILENT light and one of
in silent mode the TIMER lights ( , , or )
(see 'Silent are on.
mode').
1
Press the TIMER button to activate the
timer.
» The TIMER light ( , , or ) goes on.
2
Press the TIMER button repeatedly to
choose the number of hours you want the
appliance to operate. The corresponding
TIMER light goes on.
To deactivate the timer function, press the
TIMER button repeatedly until the TIMER light
( , , or ) is out.

Set the humidity level

,
You can set the desired humidity level only in
AUTO mode. When the humidity of the room
reaches the desired level, the humidity stays at
this level constantly.
•
or BOOST
,
Note
•
Make sure that the water bucket is filled with
water when you want to use the humidification
function (see the chapter 'Get started', section
'Prepare for humidification').
Press the HUMIDITY SET button once or
more times to set the desired air humidity
to 40%, 50% or 60%.
» The corresponding HUMIDITY SET
light (40%, 50% or 60%) goes on.
EN 15