Philips AC4086 Mode D'emploi page 26

5
Remove the Multi-care filter from the pre-
filter.
6
Take the used filter by both sides and
gently deposit them into the house hold
trash bin.
Note
•
Do not touch the pleated filter surface, or smell
the filter as it has collected pollutants from the
air.
•
Wash your hands after disposing of the used
filters.
7
Remove all packaging material from the
new Multi-care filter.
26 EN
8
Slide the new Multi-care filter into the pre-
filter.
9
Place the filer back in the appliance.
2
1
Note
•
Make sure that the side with two clips is pointing
towards you, and that all hooks of the pre-filter
are properly attached to the appliance.
10
To reattach the front panel, mount the
panel onto the top of the appliance first
(1). Then, gently place the panel against the
body of the appliance (2).
1
2
11
Reset the Multi-care filter lifetime (see the
chapter 'Reset the filter lifetime counter').