Set The Timer; Set The Humidity Level - Philips HU4902 Mode D'emploi

Set the timer

With the timer function, you can let the
humidi er operate for a set number of
hours. When the set time has elapsed,
the humidi er automatically switches
o .
1
Press the TIMER button to activate
the timer.
» The TIMER light (1H, 4H or 8H)
goes on.
2
Press the TIMER button repeatedly
to choose the number of hours you
want the humidi er to operate. The
corresponding TIMER light goes on.
To deactivate the timer function, press
the TIMER button repeatedly until the
TIMER light (1H, 4H or 8H) is out.
12 EN

Set the humidity level

Note
•
Make sure that the water tank is lled with
water before the humidi er can function (see
the chapter 'Getting started' , section 'Prepare
for humidi cation').
• Press the HUMI button once or
more times to set the desired air
humidity to 40, 50, 60 percent or no
preset level.
» The humidity light (40, 50 or 60)
of the set humidity level ashes,
then it changes and stays at the
current humidity level.
» The humidity sensor light is in
red if the desired humidity level
is not reached. It turns blue
when the desired humidity level
is reached.
Tip
•
A comfortable humidity level is between 40%
and 60%.
Note
•
If you set the humidity level to no preset level,
the humidity indicator is o but the humidi er
still humidi es the air.