Philips AC4086 Mode D'emploi page 28

Note
•
Do not touch the pleated filter surface, or smell
the filter as it has collected pollutants from the
air.
•
Wash your hands after disposing of the used
filters.
6
Remove all packaging material from the
new filters.
7
Place the new HEPA filter in the appliance
first.
8
Then, place the new activated carbon filter
in the appliance.
28 EN
9
Place the pre-filter in the appliance.
2
1
Note
•
Make sure that the side with two clips is pointing
towards you, and that all hooks of the pre-filter
are properly attached to the appliance.
10
To reattach the front panel, mount the
panel onto the top of the appliance first
(1). Then, gently place the panel against the
body of the appliance (2).
1
2
11
Reset the activated carbon filter and the
HEPA filter lifetime (see the chapter 'Reset
the filter lifetime counter').