Switch On And Off The Appliance - Philips AC4086 Mode D'emploi

Note
•
The appliance is locked after the filter light
flashing for approximately 2 weeks.
•
Approximately one day before the appliance
locks, it beeps every 30 minutes to inform you
that the filter needs to be replaced.
Switch on and off the
appliance
The appliance always operates under air
purification combined with humidification.
If you want to operate the appliance only as an
air purifier, you need to empty the water in the
water bucket.
1
Plug the appliance into the power supply.
» All lights go on twice and you hear a
beep. Then, the lights go out again.
2
Press the button to switch on the
appliance.
» The PURIFIER and HUMIDIFIER lights
are on.
12 EN
» The air quality light shows the current
air quality.
» The CURRENT HUMIDITY light
shows the current humidity level.
3
Press the button to switch off the
appliance.
Note
•
Humidifier cannot be used alone without air
purifier operating.
•
If the water bucket is empty, the humidifier is
switched off, but the air purifier still operates. In
this way the appliance operates as an air purifier
only (PURIFIER light and REFILL WATER light
are on).