SOLAC ME7710 Mode D'emploi page 15

Masseur anticellulite
Masquer les pouces Voir aussi pour ME7710:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
ME7710.book Page 15 Tuesday, March 2, 2010 9:13 AM
its tissues to absorb the ingredients.
You can use the "wave-shape" head (10) to apply the cream.
• Do not apply creams when using the protective fabric (11) on the "wave-
shape" head.
5 Recommended Treatment Duration
• Apply a 2-3 minute massage on the abdomen and a 5 minute massage
on the legs and buttocks. You may establish the duration of the massage
depending on your sensitivity. The total treatment must be
approximately 15 minutes.
• Do not use the appliance for more than 15 minutes. Using the appliance
continuously for more than 15 minutes may cause it to overheat,
reducing its life. Let it cool down before continuing use.
• Use Sculptural every day until you notice the results, which may be
subsequently maintained by using it three days a week. To maintain the
results over the long-term, adapt your lifestyle habits and food.
6 Use
)
This appliance has been designed to provide therapeutic massages to
help prevent cellulite, fluid retention and flaccidity. Do not use it for any
other purpose.
1 Plug in the appliance (fig. 1).
2 Move the switch (2) to the massage position (fig.2 B) or to the "massage
+ infrared position (IR) position" (fig.2 C) according to the desired
treatment.
3 Fit the head (7), (8), (9) or (10) corresponding to the desired treatment
onto the head adaptor (5) (fig. 3).
,
To choose which massage head to use, follow the instructions in the "Treatment
Type" table.
,
You may alternate the use of different heads during the same massage.
4 Set the intensity of the massage using the intensity control (3) and place
the massager on the area on which you are going to work.
5 Set the intensity of the massage using the control (3), according to the
area to be treated and its sensitivity to massage (see the "Treatment
Type" table).
To do so, turn the control to one side or another with your finger,
depending on the desired intensity (fig. 4).
6 Hold the massager firmly with both hands and move it over the skin in
the direction of the blood circulation (see "Massage Direction").
,
Without pressing too hard, simply glide the massager over the area to be treated.
7 When you have finished using the massager, move the switch (2) to the
"off" position (fig.2 A).
8 Unplug the appliance.
Recommended Treatment Duration
en
15

Publicité

Table des Matières
loading

Table des Matières