LaserLiner DampFinder Compact Plus Mode D'emploi page 12

– Please ensure compliance with the safety regulations set out
by local and national authorities with regard to the correct
and proper use of the device.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limits in accordance with the
EMC Directive 2014/30/EU which is covered by the
Radio Equipment Directive 2014/53/EU.
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers –
may apply. Electronic devices can potentially cause hazards or
interference or be subject to hazards or interference.
– The measuring accuracy may be affected when working close
to high voltages or high electromagnetic alternating fields.
Safety instructions
Dealing with RF radiation
– The measuring device is equipped with a wireless interface.
– The measuring device complies with electromagnetic
compatibility and wireless radiation regulations and limits in
accordance with the RED 2014/53/EU.
– Umarex GmbH & Co. KG hereby declares that the DampFinder
Compact Plus radio equipment complies with the essential
requirements and other provisions of the European Radio
Equipment Directive 2014/53/EU (RED). The EU Declaration
of Conformity can be found in its entirety at the following
address: http://laserliner.com/info?an=ABT
Information on maintenance and care
Clean all components with a damp cloth and do not use
cleaning agents, scouring agents and solvents. Remove the
battery(ies) before storing for longer periods. Store the
device in a clean and dry place.
1
Inserting batteries (see fig. A, page 02)
Open the battery compartment and insert battery according
to the symbols. Be sure to pay attention to polarity.
2
Change measuring prods (see fig. B, page 02)
12
EN