LaserLiner DampFinder Compact Plus Mode D'emploi page 11

Completely read through the operating instructions, the
„Warranty and Additional Information" booklet as well as
!
the latest information under the internet link at the end
of these instructions. Follow the instructions they contain.
This document must be kept in a safe place and passed
on together with the device.
Function / Application
This material moisture device detects and evaluates the material
moisture content of wood and building materials by way of
electric resistance measurement. The displayed value (wood) or
the calculated value (building materials) is material moisture in
% with respect to dry mass. Example: 100% material moisture
for 1 kg of wet wood = 500 g water.
The measuring instrument also features a material-independent
index mode. Measured data transfer via Bluetooth
Measurement procedure notice:
Be sure neither supply lines (electric lines, water pipes, etc) nor
a metal subsurface is present at the location to be measured.
Insert the electrodes as far into the material as possible but never
use excessive or sudden impact force as this could damage the unit.
Always pull the unit out of the material with left/right twisting
motion. Perform several comparative measurements at
different locations to minimise measurement error.
! The sharply pointed electrodes present an injury hazard.
Always put the safety cap on the unit when it is not in
use or being transported.
General safety instructions
– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modifications or changes to the device are not permitted,
this will otherwise invalidate the approval and safety
specifications.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its
functions fail or the battery charge is weak.
– Do not use the measuring probe with an external voltage.
DampFinder Compact Plus
interface.
®
11
EN