Haier HCC2430AGS Guide De L'utilisateur page 15

Before cleaning, make sure all controls are off and the cooktop is cool.
Failure to do so can result in serious bodily injury.
1. Remove the burner cap from the burner base and clean according to cleaning
section.
2. Remove the burner spreader. Clean the gas tube
opening and burner port according to cleaning
section.
3. Clean the burner base with a damp cloth (keep
the gas injector area free of cleaning agents and
any other material from entering the injector
orifice).
4. Replace the burner spreader and cap, making sure
the alignment pins are properly aligned with the
slots.
5. Turn on the burner. If the burner does not light,
check cap and spreader alignment. If the burner
still does not light, do not service the gas burner
Contact a qualified repair technician.
yourself.
WARNING
Burn Hazard
13