Gas Burners - Haier HCC2430AGS Guide De L'utilisateur

The electronic auto re-ignition, lights the surface burners when the control knobs
are turned at any valve rotation that admits sufficient gas flow to support a flame.
If any burner flame goes out due to a draft or other reason, the igniter automatically
sparks on all burners to relight the flame.
NOTE: This feature is provided as a convenience and is not intended as a safety
feature.
To set:
Push and turn knob counterclockwise, all (4 or 5) spark plugs will generate a clicking
sound (spark), however only the burner with the control knob turned from HI _ LO
will produce a flame and reignite automatically if the flame goes out.

GAS BURNERS

The gas burners design of these cooktop models, allow a pleasing option for cooking
where size, power and simmering are a primary concern.
BURNERS WITH ONE-RING FLAME
OFF
This gas burner is designed for a wide range of pan
. The use of this burner is very simple; just
sizes
push and turn the knob counterclockwise and
set to the desired position from HI to LO heat
level (see chart guide when setting heat level). Its
HI
ignition device is automatic re-ignition.
MED LO
10