Technical Description; Description Of The Device; Operation - Mobicool B40 DC/AC Notice D'utilisation

B40 DC/AC
6

Technical description

The hybrid cooler is suitable for portable use. It is equipped with two separate
cooling systems. The device features a Peltier cooling system with heat
discharged by a fan, as well as a compressor cooling system. The cooling
system is non-wearing.
In thermoelectric mode (connection to 12 Vg), it can cool goods down to
max. 20 °C below ambient temperature and keep them cool. In compressor
mode (connection to 230 V), it can cool goods down to –15 °C and keep
them cool.
In compressor mode, you can use the continuously variable thermostat to set
the temperature within a range from +12 °C to –15 °C.
6.1

Description of the device

No. in
fig. 2, page 3
1
2
3
7

Operation

CAUTION! Health hazard!
!
Food may only be stored in its original packaging or in suitable
containers.
NOTE
I
 Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the chapter "Cleaning and mainte-
nance" on page 12).
 A few water drops may form inside the cooler if it has been cool-
ing for a lengthy period. This is normal because the moisture in
the air condenses to water when the temperature in the cooler
falls. The cooler is not defective. Wipe it out with a dry cloth if
necessary.
EN
Description
Handle
Ventilation slots
Thermostat
Technical description
9