Safety Instructions - IKRA 40-3025 LI Manuel D'utilisation

Safety instructions

Attention! Read all instructions contained
herein. Failure to observe the following
instructions may result in electric shock,
burns and/or severe injury. The term 'power
tool' used in the following includes both
mains-operated tools (with mains supply)
and battery-operated tools (without mains
supply).
KEEP THESE INSTRUCTIONS CAREFULLY!
1) Instructions regarding to safe handling
a) Wear goggles or properly fitted safety glass-
es, sturdy closed shoes with non-slip soles,
gloves, snug-fitting work clothes and ear pro-
tectors (ear plugs or ear mufflers).
b) Minors should never be allowed to use an
electric trimmer. Never lend or rent your elec-
tric trimmer without these operating instruc-
tions.
c) Do not use the trimmer if other persons,
above all children, or animals are near the
working area.
d) Work calmly and stay alert. Operate the trim-
mer under good visibility and daylight condi-
tions only.
e) Before using the machine, the line and exten-
sion cords have to be checked for signs of
damage or ageing. Do not use the trimmer
when the cords are damaged or worn.
f) Do not use damaged power supply cords,
extension cords, couplings, plugs or cutting
heads.
g) Careless use can cause injuries to hand and
feet by the rotating cutting elements. Do not
switch on the unit when hands or feet are
near the cutting elements.
h) Never use metal cutting devices.
i) Only use original spare parts.
j) Remove the battery before testing, cleaning
or working on the machine and when it is not
in use;
k) Inspect cooling air slots on the motor housing
at regular intervals for clog-ups and clean as
necessary.
2) Maintenance
a) Children should be under supervision to en-
sure that they do not play with the device.
b) Any other work should be performed by your
dealer.
c) Never use metal cutting devices.
GB | Operating Instructions
d) Clean the cutting head at regular intervals.
e) Check the condition of the cutting head at fre-
f) Have a damaged cutting head replaced im-
g) Inspect cooling air slots on the motor housing
h) Clean plastic parts with a damp cloth. Do not
i) Never hose down the electric trimmer!
j) Store trimmer indoors in a dry, high or locked
3) General Instructions
1. Read the instructions manual
2. Have your dealer or a specialist show you
3. Before using the machine check that your
4. Do not put the trimmer (lawn edge trimmer)
5. Attention! Danger. The cutting head contin-
6. Before starting work check that your accu-
7. Transporting the electric trimmer, e.g. car-
4) Operational Precautions
1. Make sure the open side of the protection
2. Wear goggles or properly fitted safety glass-
GB-3
quent intervals. If the behaviour of the cutting
head changes (vibration, noise), check imme-
diately as follows: Switch off the trimmer, hold
it firmly and bring the cutting head to a stand-
still by pressing it against the ground. Then
disconnect plug from power supply. Check
condition of cutting head - look for cracks.
mediately - even if it only has superficial
cracks. Never attempt to repair a damaged
cutting head.
at regular intervals for clog-ups and clean as
necessary.
use aggressive cleaning chemicals.
place and always keep out of reach of chil-
dren.
how to operate your trimmer.
accu is in good condition and that there is no
damage. Never use the trimmer with a dam-
aged cutting head
into operation if it is visibly damaged or worn.
ues to rotate after switch-off (flywheel effect).
Keep your fingers and feet well clear to avoid
injury.
trimmer is in good condition and that it is
operating properly. Pay special attention to
the accu, switch and cutting head.
rying it to another site: Switch of the unit,
disconnect the plug.
guard is pointing away from yourself before
you switch on the trimmer.
es, sturdy closed shoes with non-slip soles,
gloves, snug-fitting work clothes and ear
protectors (ear plugs or ear mufflers).