List Of Pictograms Used; Safety Instructions; Intended Use; Information About Wireless Operation - brennenstuhl BrematicPRO UPWS 868 01 W1000 3726 Mode D'emploi

Wireless direct wire wall switch 868.3 MHz

List of pictograms used

Please read the instructions for use!
Observe the warnings and safety instructions!
Caution! Danger of electric shock!

Safety instructions

The instructions for use are a part of this product.
They contain important information about safety,
use and disposal. Before using this device, please
familiarise yourself with all instructions for use and safety instruc-
tions. Only use the device as described and for the indicated
purpose. Be sure to include all documentation when passing
this device on to others.
WARNING!
DANGER TO LIFE AND RISK OF
ACCIDENTS FOR INFANTS AND CHILDREN! Never leave
children alone and unsupervised with the packaging material.
It poses a risk of suffocation as children may swallow or inhale
small parts or plastic film. Children frequently underestimate
the dangers. Always keep children away from the device. It is
not a toy.
This device may be used by children aged 8 years and up, as
well as by persons with reduced physical, sensory or mental
capacities, or lacking experience and / or knowledge, so long
as they are supervised or instructed in the safe use of the device
and understand the associated risks. Do not allow children to
play with the device. Cleaning and user maintenance must not
be performed by children without supervision.
Only operate this device in a dry, dust-free environment.
Only operate this device indoors.
Do not expose the device to adverse conditions, such as
• moisture,
• continuous sunlight,
• heat radiation,
• cold,
• vibrations.
CAUTION! RISK OF INJURY!
We assume no liability for property damage or personal injury
due to improper use or failure to observe the safety instructions!
This will void the warranty / guarantee!
10 EN
Caution! Fire hazard!
Dispose of the packaging and device in an
environmentally friendly manner!
Any use not specified in these instructions for use will damage
the device. Do not modify the device. Otherwise safe operation
is not guaranteed.
DANGER OF ELECTRIC SHOCK!
Do not open the housing. This device has no parts which require
maintenance. In the event of a malfunction, please contact Service.
Work on the mains must be performed by an electrician whilst
de-energised.
If you do not have any expertise in this area, do not perform the
installation of the product yourself. Commission a trained electrician.
Do not use the device if it is visibly damaged.
FIRE HAZARD!
Installation of the device may only be carried out by a qualified
professional (e.g an electrician), who is familiar with the
relevant specifications (e.g. VDE).
Do not connect any terminal devices to the device which could
cause a fire or other damage when switched on unattended
(e.g. iron).
Do not switch the device unsupervised or whilst unattended.
Do not overload the device.
Overloads may result in fire hazards or device damage. The
maximum load is approx. 1000 W.

Intended use

The wireless direct wire wall switch is solely intended to switch
consumers connected to the wireless direct wire wall switch on and
off in dry indoor locations.

Information about Wireless Operation

This product uses the 868.3 MHz proprietary wireless protocol. Wireless
transmission is implemented using a non-exclusive channel, interference
can therefore not be excluded.