Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Hand pallet truck SILVERLINE with scales
English
Maintenance - References
Before transporting by truck, delivery van or similar, the fork weighing system platform must be secured to
prevent it from being removed (e.g. with straps). It then has to be readjusted before being used again.
We also recommend that it be adjusted and serviced by trained and qualified personnel once a year.
Any scale must be justified on a regular basis. Pfaff-silberblau recommended a yearly maintenance of the
scale system by qualified personnel.
Since condensation water can accumulate within the electronic components, subjecting the device to quick
temperature changes should be avoided. When any major changes of temperature are anticipated, the scale
should be shut down as a precaution.
When the lifting device is not in use, the hand lever should stay in central position. The lifespan of the sealing
will be extended.
The indicator should be cleaned with a damp cloth only.
Chemical cleaning and pressure water-jet will result in damages.
Inspection and maintenance instructions
Safety warning
Before inspection and maintenance work is carried out, appropriate measures should be
taken to remove all loads from the pallet truck.
Inspection intervals
Daily or each time
before use
monthly
Every 3 months
Annually
*)
e.g. by Pfaff-silberblau after-sales service
The service life of your pallet truck is limited. Worn parts must be renewed in
good time.
Oil and lubricant recommendations
Hydraulic oil:
HLP-DIN 51524 T2 ISO VG 22
Lubricant: Multipurpose lubricating grease – DIN 51825 T1 - K2K
Waste oil must be disposed of in accordance with legal provisions!
Technische Änderungen vorbehalten
Maintenance and inspection work
Check operating elements for faultless operation.
Check condition of the travelling rollers and roller axles
Check hydraulic system for leakage
Carry out the zero point function check on the weighing equipment
Grease joints and bearings
Check functioning of wheels and rollers
Check oil level in the hydraulic system (with lowered fork)
Check hydraulic system for leakage, (Is the top lifting height reached effortlessly?)
Check the set-up of the control lever
Check all screw and bolt connections for tightness
Grease joints and bearings
Check functioning and turning capability of wheels and rollers
Check all parts of the pallet truck for wear and replace defective parts where necessary
Change oil in the hydraulic system
Check readability of type plate.
)
)
Calibrate*
, check*
, service*
Authorise inspection by competent technical expert *
Design changes under reserve
)
the weighing system
Sous réserve de modifications techniques !
F 08.01.155
)
12 / 24
Publicité
Table des Matières
