Operation Of The Induction Burner - Unold 58105 Notice D'utilisation

OPERATION OF THE INDUCTION BURNER

Note: Your new burner is equipped with sensor buttons. All settings can be made
with a light touch of the finger. Please do not operate the sensor buttons with
wet fingers, and ensure that you do not place any objects on the buttons, in or-
der to avoid malfunctions.
1. Plug the power plug into an elec-
trical outlet use the EIN/AUS but-
ton to switch on the appliance.
2. A brief signal tone will sound, the
indicator lamp of the EIN/AUS
button will be illuminated, the
power indicator light (Watt) will
flash.
3. Caution: If you do not make any
additional settings on the appli-
ance within one minute, the appli-
ance will switch off.
4. You can control the appliance eit-
her by power or by temperature.
Press the "FUNCTION" button to
switch between the two modes.
The power level or temperature
level can be changed at any time
while you are cooking by pressing
the "+" or "-" buttons. The basic
setting for the appliance is 1,200
watt.
5. Place a suitable pot with food to
be cooked in the middle of the
burner.
Control via heating power
6. Press the "FUNCTION" button
once. The "Watt" indicator lamp
lights up. The power level will be
shown in the display. Use the "+"
and "-" buttons to change the
power level.
7. The following settings are possi-
ble:
24
Model
58105
200 W
400 W
600 W
800 W
1000 W
1200 W
1400 W
1600 W
1800 W
2000 W
8. Note: To quickly change between
the lowest and highest power
level, simply touch the "Max" or
"Min" buttons. The appliance will
immediately switch over to the
selected power level.
Min
Max
Control via temperature
10. To control the device via the tem-
perature, press the "FUNCTION"
button until the indicator lamp,
"Temp", lights up and the basic
setting "180" appears in the dis-
play.
Model 58175
Left Right
500 W 500
800 W 800
1.200 W 1.000 W
1.500 W 1.200 W
1.800 W 1.300 W
2.000 W 1.500 W
Model Mo-
58105 dell58175
200 W 500 W
2,000 W 2,000 W